Sale
TYR – NEXUS™ AND CONTINUITY™ CHOKE-INPUT MONOBLOCK AMPLIFIER
€1,950.00 – €1,990.00
- Description
- Additional information
- Help
Description
Description
Forget the technobabble and buzzword bingo for a sec. Here’s what Tyr is: a monstrous, old-skool, crazy heavy, over-the-top mono speaker amplifier. It uses the best of today’s and yesterday’s technologies to create something totally unique—and It has enough power to run almost anything.
Please note: “mono” means “one channel.” You need two Tyrs for stereo.
Beyond Overbuilt
55 lbs. 12 lb choke. 160,000uf filter capacitance. 24 150W Toshiba output devices. 7 internal power supply rails, including HV boost rails that uses unique discrete CFP regulators. Sounds like overkill? It is. Tyr is our most insane amplifier ever, designed for driving difficult speakers without breaking a sweat.
Unique Nexus™ and Continuity™ Topology
Tyr is the ultimate expression of both Nexus and Continuity. In other words, this is a balanced, differential amplifier with a unique discrete, current-feedback gain stage, coupled with Continuity™ output topology that eliminates transconductance droop. In Tyr, we’ve refined Continuity even further, resulting in a cooler-running amplifier.
Back to the Past
One of the keys to Tyr’s performance is it’s huge inductor—literally the same size as the power transformer. This custom-made inductor is the “choke” in the “choke-input power supply.” This is a super old-skool technique you don’t see anymore, because chokes cost a mint and some people think banks of capacitors are more visually impressive.
Intelligent Oversight and Convenience
Like all of our amplifiers, Tyr is managed by a microprocessor running custom firmware. It monitors all operational parameters, from bias to temperature to DC, and protects the amplifier in case of any fault, for near-bulletproof reliability. Add the ability to put the amplifier into low-power “standby” mode on the front panel and switchable balanced and SE inputs, and Tyr is our most convenient amp ever.
Designed and Built in California
By “designed and built in California” this is what we mean: the vast majority of the total production cost of Tyr—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us. Our transformers are also made in California. All of this comes together in our Valencia, California facility, where each Tyr is assembled, tested, burned in for 3 days, and then listen-tested again.
Warranty
Tyr is covered by a limited warranty that covers parts for 5 years as long as Schiit USA covers the manufactory warranty see our general terms. Labor is 2 years.
14-Day Satisfaction Guarantee
Try Tyr in your own house for 14 days. If you don’t like them, simply send them back for a refund. Try spending 14 days in an audio store. They’ll kick you out. Unless you buy them donuts. Maybe.
Power Output:
8 Ohms: 200W RMS per channel maximum
4 Ohms: 350W RMS per channel maximum
Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB
THD: <0.01%, 20Hz-20KHz, at 200W RMS into 8 ohms
IMD: <0.01%, CCIR, at 200W RMS into 8 ohms
SNR: >120db, A-weighted, referenced to full output
Damping Factor: >200 into 8 ohms, 20-20kHz
Gain: 22 (28dB)
Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 40/22. You do the math.
Input Impedance: 47k ohms SE, 47k ohms balanced
Inputs: RCA for SE input, XLR for balanced input, rear panel switchable
Topology: Nexus™ discrete differential current feedback gain stage, no coupling capacitors or DC servos with Continuity™ constant transconductance output stage, all BJT output
Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with standby mode and relay shut-down for overcurrent, thermal, and other faults
Power Supply: 600VA transformer with 600VA choke input to main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management.
Power Consumption: 750W maximum
Size: 16” x 13” x 3.875”
Weight: 55 lbs each
Additional information
Additional information
Weight | N/A |
---|