GJALLARHORN – COMPACT CONTINUITY S SPEAKER AMP
€439.00 – €469.00
- Description
- Additional information
- Reviews (1)
- Help
Description
Description
Ever wanted an ultra-high-end speaker amp—in a compact size perfect for desktops and smaller rooms? Have you wished for a dead-silent, no-hiss amp for nearfield listening—that’s still capable of driving most speakers to lease-breaking levels? Wish no more. Welcome to Gjallarhorn.
Less Power, More Better
There are plenty of big-number amps out there, but how much of that do you really use? How loud before the neighbors complain? How old does the constant hiss of a high-gain get with the speakers a few feet away? Gjallarhorn was designed to deliver exceptional performance, without the downsides. Or, as we put it: less power, more better.
Exotic, Fully Discrete Topology
Gjallarhorn may be smaller than our other amps, but that doesn’t mean it skimps on quality. It features an exotic, fully discrete, current feedback gain stage with our exclusive Continuity S™ output stage, as well as a fully linear power supply—including a toroidal transformer with stacked rails and 30,000uF of filter capacitance. No Class D, no switching supplies, no fans. Pick it up—it’s a heavyweight!
Flexible for Desktop and Beyond
Combine Gjallarhorn with any of our headphone amps to add power for nearfield monitors, or pair with Saga for an exceptional small-room system. Have balanced preamp outputs? You can use them with a pair of Gjallarhorns, for additional power and capability.
Designed and Built in California—For Real
By “designed and built in California” this is what we mean: the vast majority of the total production cost of Gjallarhorn—chassis, boards, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our California factory. Our PCBs are done in Simi Valley. You get the picture.
5-Year Warranty and Easy Return Policy
Gjallarhorn is covered by a 5-year limited warranty that covers parts. And if you don’t like your Gjallarhorn, you can send it back for a refund, within 14 days of receiving it.
Power Output:
Stereo, 8 Ohms: 10W RMS per channel
Stereo, 4 Ohms: 15W RMS per channel
Mono, 8 ohms: 30W RMS
Frequency Response: 20Hz-20Khz, +/-0.01db, 3Hz-500KHz, +/-3dB
THD: <0.004%, 20Hz-20KHz, at 1V RMS into 8 ohms
IMD: <0.005%, CCIR, at 1V RMS into 8 ohms
SNR: >117dB, unweighted, referenced to full output
Damping Factor: >100 into 8 ohms, 20-20kHz
Gain: 10 (20dB)
Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 9/20. You do the math.
Input Impedance: 20k ohms SE, 40k ohms balanced
Crosstalk: >80dB, 20-20kHz
Inputs: L/R RCA jacks for stereo input, single XLR for mono input
Topology: Continuity S output stage; fully discrete, fully complementary current feedback, no capacitors in the signal path
Oversight: over-current and over-temperature sensors with relay shut-down for faults
Power Supply: 80VA transformer, 30,000uF filter capacitance, plus boosted, CFP-regulated supply to input, voltage gain and driver stages
Power Consumption: 80W maximum
Size: 9” x 6” x 2.5”
Weight: 8 lbs
Additional information
Additional information
Weight | N/A |
---|
david-8462 (verified owner) –
Shipped to Spain in very good shock-resistant packaging from the Netherlands. Fast delivery.
Dead silent when no signal is being sent. Noise floor is at zero. It is real.
My DAC-pre-amp knob is near minimum and it is very loud (Near-Field application). I didn’t expect so much power from this amp’s 10W(8ohm) / 15W(4ohm) specifications.
With a Subwoofer you can probably make it shine even more: taking some load (Amps) from the low frequencies to the benefit of the rest.
I will never stress this amp’s current enough with my usage. If you push Windows volume to 100% and pre-amp’s volum to 50%+ you are standing under a plane’s jet turbine.
Zero noise floor to peak loudness gives it a great dynamic range. Remember to always take care of your hearing, to listen to lots of music forever.
Man it is good! I enjoy my music more now.